from
Product Notice: Pending Obsolescence
Features
- 8-bit, fully integrated HyperTransport™ end-chain interface, optimized for Altera's Stratix® II, Stratix II GX, Stratix, and Stratix GX FPGAs
- Packet-based protocol
- Dual unidirectional point-to-point links
-
Low-swing differential signaling with 100-Ohm differential impedance
-
Complies with the HyperTransport I/O Link Specification, Revision 1.03
- Up to 16 Gbps throughput (8 Gbps in each direction)
- Preliminary Stratix II and Stratix II GX device support for 200-, 300-, 400-, 500-MHz DDR links
- Full Stratix and Stratix GX device support for 200-, 300-, 400-MHz DDR links
- Easy-to-use MegaWizard® Plug-In Manager generates parameterized MegaCore® functions for resource-optimized instantiations
- Manages HyperTransport interface flow control, optimizing performance and ease of use
- Independent buffering for each HyperTransport virtual channel
- Automatic handling of HyperTransport ordering rules
- Stalling of one virtual channel does not delay other virtual channels (subject to ordering rules)
- Flexible parameterized buffer sizes, allowing customization depending on system requirements
- User interface has independent interfaces for the HyperTransport virtual channels, allowing independent user logic design
- Integrated detection and response to common HyperTransport error conditions, such as cyclic redundancy code generation and checking to preserve data integrity
- Automatically handles all CSR space accesses
- Fully integrated HyperTransport configuration space includes all required configuration space registers and HyperTransport capabilities list registers
- 32-bit and 64-bit support across all base address registers (BARs)
- Hardware verified with HyperTransport interfaces on multiple industry-standard processor and bridge devices
- Alliance Semiconductor SP1011
- Broadcom BCM1250
- PLX HT7520
- PMC-Sierra RM9000x2
- Application-side interface uses the Altera® Atlantic™ interface standard
- Intellectual property (IP) functional simulation models provide cycle-accurate behavioral simulations in industry-standard Verilog HDL and VHDL simulation tools
General Description
The Altera HyperTransport MegaCore function implements high-speed packet transfers between physical (PHY) and link-layer devices, and is fully compliant with the HyperTransport specification. This core allows you to interface quickly and easily to a wide range of HyperTransport technology-enabled devices, including network processors, coprocessors, video chipsets, and ASICs.
OpenCore Plus Evaluation
Use the Altera OpenCore Plus evaluation flow to test drive this IP core.
Performance
Typical expected performance and utilization figures for this core are provided in the HyperTransport MegaCore Function User Guide (PDF).
Technical Support
Technical support for this IP core function is provided by the Altera mySupport online issue tracking system. You may also search the Altera Knowledge Database for topics related to this function.
Related Documents
- HyperTransport MegaCore Function User Guide (PDF)
- MegaCore IP Library Release Notes and Errata (PDF)
Obsolescence Notice: This product is not recommended for new designs. Please refer to Product Discontinuance Notice PDN0906.
